Handling
Shake well before use.
Spray at room temperature by moving the can from one side to the other and from top to bottom and holding the can at a distance of 30 – 40 cm from the vertically positioned or slightly inclined and completely dry object. (Make the change in spray direction away from the picture!)
May only be applied to the layer of paint after it has dried completely (drying time for oil colours: at least 8 – 12 month; drying time for thin acrylic coulours: approx. 3 days, for thicker acrylic layers: approx. 1 – 2 weeks; drying time for gouache: approx. 1 day).
The dried varnish layer remains soluble in turpentine substitute 50019, oil of turpentine 50024 / 50102 or varnish remover 50060 over a long period.
The varnish coats normally used in practice give no special UV protection to the paints used! For this reason, we recommend that you use high-quality and lightfast artists´ paints from the outset as far as possible.
The subsequent varnishing of the surface of a picture produced using materials low in binding agents, especially pastels, gouache and water-colours, may cause the colour shade to become significantly darker. Varnishes also may increase transparency of some grounds, like e.g. papers.
The product is also suitable for inkjet-prints, art prints or photos.
Any clogged-up spray heads are best cleaned using acetone.
Store in a cool and dry place.
Protect from sunlight and do not expose to temperatures exceeding 50°C (122°F).
Individual pre-tests are required.
Sizes: 150 ml and 400 ml
Contains: propane/butane, acrylic resin, UV-absorber, mineral spirit; 50592 and 50594 also contain a matting agent.