Handling
Shake well and stir – if necessary – before use.
The mineral surfaces should be clean, dry, intact and without any mould-release agents.
The kind of use depends on the absorbance of the surface being treated.
Size / primer is mixable with water, but dries up to a water-insoluble film.
Normally one uses the product in dilution with 4 parts water. In the case of difficult surfaces (very absorbent / sandy) please use the concentrate. (It is important that there is no closed film on the surface!)
The product can be applied with a brush, a paint roller or an airbrush.
Please clean tools like brushes as soon as possible with water or water and soap.
Please don´t use the product below temperatures under 5 °C object- and room-temperatures. Also beware the application on warm surfaces or under direct sun irritation!
As primer afterwards we recommend i.e. Schmincke primer 1, strongly absorbent 50512 or Schmincke primer 2, 50514.
Please take care that for outdoor paints additional arrangements have to be made (e.g. paints with maximum light fastness; sealing with acrylic lacquer, glossy 50586 or acrylic lacquer, satin glossy 50587).
Close immediately after use.
Store in a cool and dry place.
Protect from frost.
Individual pre-tests are required.
Sizes: 500 ml
Contains: acrylate styrol dispersion.