Handling
Stir – if necessary – before use.
Modelling paste, fine is ready for use and should be applied pure or mixed with acrylic colours with a pallet knife onto a greaseless painting ground. (Product has a brightened effect!)
If coats thicker than 1,0 cm are required, these should be built in stages.
The time for drying depends on the thickness of the surface and can last from several minutes up to several hours.
The dried structures can be treated with very fine abrasive paper or a knife. They can be overpainted with acrylic colours after getting completely dry.
The product can be diluted with water, but dries up water-insoluble.
Please clean tools as soon as possible with water or water and soap. Just dried acrylic colours can be removed with brush cleaner 50051 / 50052.
Please don´t use the product below temperatures under 10 °C object- and room-temperatures.
Close immediately after use.
Store in a cool and dry place.
Protect from frost.
Individual pre-tests are required.
Sizes: 300 ml and 1000 ml
Contains: pure acrylate dispersion, pigments, fillers, additives, water